By Steve Carfi

I always here man the caddy LMP is a great car BUT i can't run it with others of it's type!
WELL NOW YOU CAN!!
This is a simple mod anyone can do it's easy!!
You may just find your Caddy LMP Kicking some open cockpit cars Butts after this!!

WHAT'S NEEDED!
Moto tool & Bit
Super Glue
FLY or NINCO Round NOE Button Magnet
Vice Grips
SUPER TIRES SCALE-1100 OPTIONAL

 PIC A -First you take the car apart! 

PIC B- Next i used a moto tool with a
                                                                                          Cutter bit and ground out a hole for the 
                                                                                          new magnet Do this by fallowing the
                                                                                          outer edge of the original magnet holder
                                                                                         do this until the new magnet fits through so
                                                                                          you can then mount it flush in the chassis
                                                                                          later on .

                                                                  PIC C- Here i used a vice grip pliers and held the magnet
                                                                     securly (GENTLY CLAMP MAGNET TO MUCH
                                                                     CLAMPING FORCE WILL CRACK IT!) Now with
                                                                    a cutter bit i gently ground a notch out of the magnet BE
                                                                   CARFUL HERE!  make sure you do a little grinding at
                                                                   a time so you don't heat up the magnet! I did a little then
                                                                   I dipped the magnet in a bowl of ice water frequently so
                                                                   the magnet stayed cool HEAT DESTROYS MAGNETS
                                                                   FORCE SO KEEP IT COOL!!
                                                                  PIC D- shows where to grind the notch out of magnet!

PIC E- This shows how i glue in the magnet.. BUT MAKE SURE YOU TEST IF YOUR MOTOR
FITS IN FIRST WHEN THE MAGNET IS SETTING FLUSH TO BOTTOM OF CHASSIS!!
If it does then next use a flat piece od wood or something so you can set the magnet in the chassis flush like shown above.(i used a piece of Plexiglass) Put the chassis down on the flat surface
holding it in place by hand next drop the magnet in the new hole you made push it down and make sure the spot you ground on the magnet is facing forward like in pic E!! Next put two tiny drops of super glue on the right and left side of the magnet NOT TO MUCH you don't want the glue to go out the bottom and make your magnet and chassis stick to the flat wood or what ever you are using! Now hold it in place for a few seconds then you can pick it up and go all the way around the magnet with the glue you also can do the same on the bottom of  the chassis and go around the magnet with the super glue there also.
 PIC F- After you grind magnet and 
                                                                                                    glue it in it should look like this
                                                                                                    with clearance by both red marks.

                                                                                                 PIC G- Shows bottom of car with
                                                                                                             Magnet installed flush in car

WELL THERE YOU HAVE NOW GO OUT AND KICK SOME BUTT!!
ADD Super tires # SCALE-1100 And she will go even faster!!

                                             If you have any ?'s please E-MAIL ME